BML Bridge pipe

DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.

BML Pipe Inside:   Fully cross-linked epoxy thickness min. 120 µm
Outside: Two-layer thermal spraying zinc coating min.40µm,+cover two-components epoxy coating min.80 µm silvery gray (Color RAL 7001 )

BML Fittings

Inside and outside:
Zinc-rich primer min. 70 µm + top coat epoxy resin min. 80 µm silvery gray

Copyright © 2013-2015 DINSEN IMPEX CORP. All Rights Reserved
TEL:0086-0310-8906676 FAX:0086-0310-3252086 ,