-
Cast Iron Rainwater Pipes
We supply a complete range of Rainwater pipes and fittings.
Our range of cast iron rainwater products are available in standard grey metal primer with rust inhibitors.
Cast iron rainwater products offer a wide choice of designs. Pipes can be round, square or rectangular.Pipes should be straight with a consistent metal thickness. The external should be even and without any obvious defects like cracking or uneven wall thickness. The inside of the pipe shouldn’t have any obstructions that could restrict the flow of water. -
EN877 BML Bridge Pipe
DS MLB (BML) Bridge drainage pipe is has typical properties of resisting acidic waste gas, road salt mist, etc. suit-able for special requirements in the field of bridge construction,roads, tunnels with its typical resistance of acid exhaust fumes,road salt etc. Furthermore, MLB also can be used for underground installation.
The material is cast iron with flake graphite as per EN 1561, at least EN-GJL-150. The inside coating of DS MLB fully meet EN 877; the outside coating corresponds to ZTV-ING part 4 steel construction, annex A,table A 4.3.2, construction part no. 3.3.3. The nominal dimensions range from DN 100 to DN 500 or 600,length 3000mm.
-
EN877 TML Cast Iron Pipe
EN877 TML cast iron pipe
Sizes: DN40 to DN400, including DN70 and DE75 for part European market
Standard: EN877
Material: Grey iron
Application: Construction drainage,pollution discharge, waste water,rain water
Painting:
Outside of the pipe is thermal spray zinc coating min.130g/m² + top coat brown epoxy resin min.60μm (as you requirement)
Inside of the pipe is fully cross-linked epoxy,thickness min.120μm
payment term: T/T, L/C, or D/P
Production capacity: 1500 tons/ month
Delivery time: 20-30 days, depend on your quantity.
MOQ: 1*20 container
Features: Flat and straight ; high strength and density without defect;easy to install and maintain ; long lifetime ,fireproof and noise resistant; environmental protection -
EN598 DI Pipe
Ductile iron pipes and fittings