-
DINSEN Ductile Iron Grooved Fitting Eccentric Reducer Pipe Fittings for Fire Fighting System
EN877 Cast Iron Pipe Fittings include common pipe fiftings and heterosexual pipe fiftings. -
DINSEN Double Branch 45° EN877
Part of the standard range, the DINSEN double branch poxy film applied by cataphoresis and are fully and indefinitely recyclable. Cast iron DINSEN range complies with European standard EN877 and has remarkable fire protection properties as well as exceptional acoustic performances. -
DINSEN P Trap EN877 Cast Iron Fittings Iron Pipes Product Type
1.Size: 1.5"-15"
2.Pipes Length: Customized
3.Certificate: CSA& UPC
4.Standard: EN877
5.Coating: Epoxy paint
6.Delivery time: 30-40days
7.Application: Waste water drainage &Ventilation -
DINSEN Double Socket Degree 90 Bend Taper Ductile Iron Pipe Fittings
Technics: Casting
Shape: Reducing
Head Code: Round -
DINSEN En877 Standard Cast Iron Pipe Fittings 45 88 Degree Bend
SML pipelines are mainly exported to developed countries in Europe. They will be used to buildings' drain water system. The service life is basically the same as the house, and the addition of epoxy resin can increase the service life by at least 15 years. Epoxy resin coating has the characteristics of acid resistance, alkali resistance, wear resistance, pressure resistance, impact resistance and mold resistance. -
DINSEN Low Price Wholesale SML EN877 Hubless Fittings Grey Cast Iron Pipes And Fittings
Product Feature:
1. Smooth surface;
2. Good adhesion;
3. Corrosion resistance;
4. No noise;
5. Tensile strength ≥200 MPa; -
DINSEN Double Branch 68°
Product Feature:
EN877, ISO6594, CSA B70, CISPI 310
Hubless pipe & fitting
Material: Grey Cast Iron
Coating: SML,KML,BML,TML
-
DINSEN SML Cast Iron Fitting P-T-T-Trap
EN877 Fitting Size:DN30-DN300
Standard EN877
EN877 Cast Iron Fitting Material Gray Iron
Application of Construction Drainage, Pollution Discharge, Rainwater Sewage.
Drawing
Internal and external, coated with high-quality epoxy powder by fusion, about 200μm (as you require) -
DINSEN EN877 Cast Iron Fittings For Drainage System
EN877 Cast Iron Pipe Fittings include common pipe fiftings and heterosexual pipe fiftings. -
European Standard SML En 877 Cast Iron Pipe For Sewage System From Factory
SML EN877 epoxy coated cast iron pipe drainage pipe fittings
1.EN877 standard
2.DN40-DN300
3.epoxy paint inside, anti-rust painted outside
4.for water drainage, ITS approval -
NoHub-SML P-Trap
Because of its shape, the trap retains some water after the fixture's use. This water creates an air seal that prevents sewer gas from passing from the drain pipes back into the building. Essentially all plumbing fixtures including sinks, bathtubs, and showers must be equipped with either an internal or external trap. Toilets almost always have an internal trap. -
No Hub- SML 88°Corner branch
Comer branches are used to connect to branch runs of drainage coming from different directions into a main soil stack. As the name suggests, they are most commonly found in the corner of a room.
The angle of this 88 degree corner branch creates a 2 degree fall that promotes self-cleansing.